1-800-221-3332

Houston, TX • Nashville, TN • Oklahoma City, OK • Wasilla, AK • Orlando, FL • Temecula, CA

Multiple Hottaps, Linestops and FreezePlug Services

Multiple 3/4", 8" and 10" Hottaps, Many 8" and 10" Linestops and a couple 4" Pipe FreezePlug Services

Job Status: Successful and Completed
Job Date: January 28, 2014
Location: Kansas City, MO
Job Specifics: ltem 1 Linestop 6” - Below Computer Floor – Second Floor
8 – 6” Linestop weld fittings for Carbon Steel Chilled Water (Fitting provided by IFT and weld on by Contractor)
8 – Installation of temporary valve with air test.
8 – Hot Taps to allow for linestop entry
8 – Insertion of 6” linestop
8 – 3/4” Tap on contractor supplied and installed materials for blow down and equalizing pressure to remove linestop. (If Needed)
8 – 6” Linestops held up to 8 Hours while you make pipe modifications
8– Removal of Linestop, install Completion Plug and Blind Flange

ltem 2 Linestop 10” - Ceiling of First Floor
4 – 10” Linestop weld fittings for Carbon Steel Chilled Water (Fitting provided by IFT and weld on by Contractor)
4 – Installation of temporary valve with air test.
4 – Hot Taps to allow for linestop entry
4 – Insertion of 10” linestop
4 – 3/4” Tap on contractor supplied and installed materials for blow down and equalizing pressure to remove linestop. (If Needed)
4 – 10” Linestops held up to 8 Hours while you make pipe modifications 4– Removal of Linestop, install Completion Plug and Blind Flange

ITEM 3 – 4” Freeze - Ceiling of First Floor
2 – 4” Pipe freeze on Carbon Steel Chilled Water Pipeline (70 degrees or less ) 6 - Hour hold time for freeze while you perform pipeline modifications

Linestop® • Valve Inserting • Pipefreeze® • Large Tapping Linestop® is a registered Trademark and Servicemark of International Flow Technologies, Inc.

OR Call

Nationwide: 1-800-221-3332

International: 1-951-926-4849

Go to top